Friday, July 17, 2015

A grand challenge for nano: Solar energy harvesting near the thermodynamic limit

As I'd mentioned earlier in the week, the US Office of Science and Technology Policy had issued a call for "Grand Challenges" for nanotechnology for the next decade, with a deadline of July 16, including guidelines about specific points that a response should address.  Here is my shot:  

Affordable solar energy collection/conversion that approaches the thermodynamic efficiency limit based on the temperature of the sun (efficiency approaching 85%).  

Physics, specifically the second law of thermodynamics, places very strict limits on how much useful energy we can extract from physical systems.  For example, if you have a big rock at temperature \(T_{\mathrm{hot}}\), and another otherwise identical big rock at temperature \(T_{\mathrm{cold}}\), you could let these two rocks just exchange energy, and they would eventually equilibrate to a temperature \(T_{0} = (T_{\mathrm{hot}}+T_{\mathrm{cold}})/2\), but we would not have gotten any useful energy out of the system.  From the standpoint of extracting useful energy, that process (just thermal conduction + equilibration) would have an efficiency of zero.  Instead, you could imagine running a heat engine:  You might warm gas in a cylinder using the hot rock, so that its pressure goes up and pushes a piston to turn a crank that you care about, and then cool the piston back to its initial condition (so that you can run this as a cycle) by letting the gas dump energy to the cold rock.  Carnot showed that the best you can do in terms of efficiency here is \( (1 - T_{\mathrm{cold}}/T_{\mathrm{hot}})\).  On a fundamental level, this is what limits the efficiency of car engines, gas turbines in power plants, etc.  If the "cold" side of your system is near room temperature (300 Kelvin), then the maximum efficiency permitted by physics is limited by how hot you can make the "hot" side.  

So, what about solar power?  The photosphere of the sun is pretty hot - around 5000 K.  We can get energy from the sun in the form of the photons it radiates.  Using 300 K for \(T_{\mathrm{cold}}\), that implies that the theoretical maximum efficiency for solar energy collection is over 90%.  How are we doing?  Rather badly.  The most efficient solar panels you can buy have efficiencies around 35%, and typical ones are more like 18%.  That means we are "throwing away" 60% - 80% of the energy that should be available for use.  Why is that?  This article (here is a non-paywall pdf) by Albert Polman and Harry Atwater has a very good discussion of the issues.   In brief:  There are many processes in conventional photovoltaics where energy is either not captured or is "lost" to heat and entropy generation.  However, manipulating materials down to the nm level offers possible avenues for avoiding these issues - controlling optical properties to enhance absorption; controlling the available paths for the energy (and charge carriers) so that energy is funneled where it can be harnessed.  On the scale of "grand challenges", this has a few virtues:  It's quantitative without being fantastical; there are actually ideas about how to proceed; it's a topical, important social and economic issue; and even intermediate progress would still be of great potential importance.  


33 comments:

Anonymous said...

A couple of quibbles about side issues.

1. Carnot only provides limits for closed cycle systems. For instance, it can be used for the cylinder of gas in the two-rock example. But it is not applicable to car engines, which are open-cycle internal combustion engines. I.e., the "working fluid" does not return to the original state at the end of a cycle; instead, the fluid is forced out and fresh fluid is placed in the cylinder. Here is one of the few links that I could find:
http://energy.gov/sites/prod/files/2014/03/f8/deer11_edwards.pdf

2. Gas turbine are similarly open-cycle systems, but most power plants use steam turbines. The steam is heated by burning the fuel, and cooled (usually using water from a river), and these are indeed closed-cycle systems and can be considered imperfect Carnot systems.

Anonymous said...

"...it's a topical, important social and economic issue"

I don't agree. Solar energy's problem is intermittency, not efficiency.

Thus the 'storage problem'...and how to solve it economically at the scale of an utility...which I believe is impossible because it requires directly going from photons-->chemical bonds.

David Strubbe said...

Anon at 2:28, direct conversion of photons to chemical bonds is certainly possible. It is the basis of "solar thermal fuels," which are being developed in my research group using molecules that undergo photochemical reactions to change structure and store energy for later release as heat.

https://mpc-www.mit.edu/news/newsletters/may-2013/item/137-advancing-solar-thermal-fuels
https://www.dropbox.com/s/h0h0cvuq8818fsc/Full_with_apps2.mov

james brownn said...

Thanks for a wonderful share. Your article has proved your hard work and experience you have got in this field. Brilliant .i love it reading.
solar customer

T Anil Jain said...

Hm.. Nice Article! Thanks for sharing..

Solar Installers Las Vegas said...

Solar cells based on semiconducting composite plastics and carbon nano tubes is one of the most promising novel technology for producing inexpensive printed solar cells.Carbon nano tubes are more and more attractive for use in solar cells as a replacement for silicon. They can be mixed in a semiconducting polymer, and deposited from solution by simple and inexpensive methods to form thin and flexible solar cells.

Unknown said...

Solar Systems Technology came newly in Pakistan so Very high Solar System Price in Pakistan

Charles Price said...

Today the world has the innovation to outfit the Solar rays and transform over solar power to electrical energy, which can be stored or utilized promptly. Also, sunlight is accessible and gives enough energy every hour to address the world's needs for an entire year.

bilal kazmi said...

Good article, I feel that Solar energy is a hot topic these days, i think that we should try some new methods, like using the sun's rays to generate clean energy.

Anonymous said...

really worth to read, in these hot days solar panel and a very good battery is very requisite to install in every house.

Reon Energy said...

A large number of solar companies in Pakistan are with different industries, however, Reon Energy is a famous name. It has worked with top-notch companies and installed 1MW and above projects in Pakistan

Anonymous said...

good informative article

solar panels price in pakistan said...

Thanks for sharing This Blog Post - Write A Blog Post Also On https://seinfo4.com/solar-plate-price-in-pakistan-solar-panel-prices-2023/Solar Panel Prices In Pakistan Pls

tier 1 solar panels in pakistan said...

you are such a great blogger.

tesla solar panel said...

You such a great blogger you are, great work.

Solar panels prices in Pakistan said...

best solar panels prices in Pakistan.

Solar panels price in Pakistan said...

Solar panels price in Pakistan

Longi Solar Panels said...

Longi Solar Panels

Diesel Fuel Supplier said...

Top 10 Diesel Fuel Supplier

Submersible Pumps In Pakistan said...

Submersible Pumps In Pakistan

Solar Energy Solution In Pakistan said...

Solar Energy Solution In Pakistan

Tier 1 Solar Panels In Pakistan said...

Tier 1 Solar Panels In Pakistan

best fortnight game free download said...

best fortnite game

Growatt 5 kw solar inverter price in pakistan said...

here at qas4.com, u can get discounted quote of Growatt 5 kw on grid solar panel price in Pakistan and u can also purchase growatt inverters.

growatt solar inverters said...

here at qas4.com, u can get a discounted quotes of Growatt 5 kw on grid solar panel price in Pakistan and u can also purchase Growatt inverters.

affiliate said...

affiliate qas4 is one of the best affiliate services providers.

solar panel price in pakistan said...

here it is the no.1 Solar Energy company in Pakistan is https://priceinpakistan.qas4.com

steel rate today said...

here is the latest prices of steel in pakistan.

top 10 solar panels in pakistan said...

this is the only one website who gives us the best prices of solar panels

Palmetto Energy Solutions said...

Great blog post! I've been considering making the switch to solar energy for my home in South Carolina, and your insights have been valuable. I'm currently in the research phase and looking for recommendations on the best solar company in South Carolina. If anyone has had positive experiences or has suggestions, I'd love to hear them.

Solar said...

Great Post

Solar Panel Price in Rawalpindi said...

write also about solar panels prices in pakistan.

Best solar panels in Pakistan said...

Engaging in discussions about optimizing solar energy harvesting near the thermodynamic limit highlights the ongoing quest for efficient renewable energy solutions. At https://solar.cmgl-x.com/, we're dedicated to exploring cutting-edge technologies and advancements in solar energy, including methods to enhance efficiency and address challenges like intermittency. Join us as we delve into the forefront of sustainable energy research and innovation.